12: View Status Of A Point; 13: View Alarms, Supervisories Or Troubles; 14: View System Information - Honeywell IFP-75 Installation & Operation Manual

Basic Operation
5. A screen similar to those shown in Figure 10.3 will display.
You can print the Detector Status by uploading the Detector Status to the HFSS Honeywell Fire Software Suite. Then, print the
Detector Status from the HFSS Honeywell Fire Software Suite.
10.4.12 View Status of a Point
1. From the Main Menu, select 2 for Point Status.
2. From the list that displays, press ENTER to select the module where this point is located. The screen that displays will
show you if the point has a trouble and will provide the sensitivity compliance information. (See Section 10.4.11 for
complete information about the Detector Sensitivity compliance.)
10.4.13 View Alarms, Supervisories or Troubles
When the system is in alarm, supervisory or trouble, you can press the down arrow key to view the location of an alarm, super-
visories or trouble.
10.4.14 View System Information
Press 8 from the Main Menu to view the panel model, the serial number, the system version number and the date. Press the left
arrow key to return.

About Panel
Press 1 to access the About Panel to view the panel model, serial number, system version number and the date.

Send/Receive Firmware Updates
The has the ability to be updated in the field. The most recent
IFP-75
the Web Site. Once a panel is updated using the Firmware Update Utility, you can use Send/Receive Firmware updates to
propagate the Firmware to the other panels in the network.
1. Press 2 to send a Firmware Update or press 3 to receive a Firmware Update from the System Information Menu. The
available panels are listed in the Menu. Note: this feature requires a Multi-site Installer Access Code.
2. Use the up or down arrow key to select a panel to send/receive an update to/from. Press ENTER to start the update
process.

Feature Activation
This Menu is used to activate/register additional features.
1. Press 4 from the System Information Menu. This will bring up the Feature Activation Menu.
2. Press 1 to enter a six digit activation code or press 2 to review features already activated in this panel.
IFP-75/IFP-75HV Installation/Operation Manual — P/N LS10147-001SK-E:D 06/25/2021
Figure 10.3 Checking Detector Sensitivity Compliance
Firmware Update Utility can be downloaded from
IFP-75
System Operation
109