2: View Group Points; 3: Edit Opg Template; Point; 1: Point Programming For Slc - Honeywell IFP-75 Installation & Operation Manual

Point

9.4.2 View Group Points
1. Enter the Installer Code. The panel will automatically access the Main Menu.
2. Select 7 to access the Panel Programming.
3. Press 3 to enter the Group Menu.
4. Press 2 to view the Group Points.
5. Enter the group number, then press ENTER.
.
9.4.3 Edit OPG Template
1. Enter the Installer Code. The panel will automatically access the Main Menu.
2. Select 7 to access the Panel Programming.
3. Press 3 to enter the Group Menu.
4. Press 3 to edit the OPG Template.
5. Enter the Template number, then press ENTER.
6. On the Template name, press ENTER to edit the name.
You can enter a description to assign and display a descriptive name for a group.
NOTE: See Appendix B for information to edit names.
7. Press the right arrow to access the OPG and select Yes or No to select which Output Group to include in the template.
9.5 Point
You may need to change the characteristics of the individual input points (detectors and switches) even after using the JumpStart Auto-Pro-
gramming. This Section describes how to change the options for the following:.
• type of point
• detector accessory base options •
9.5.1 Point Programming for SLC
To program for points, follow these steps:
1. Enter the Installer Code.
2. Select 7 to access the Program Menu.
3. Press 4 to enter the Point Menu.
4. Press the up or down arrows to select the desired module. Refer to Section 8.5 Quick Reference Table for available choices.
5. Enter the number of the point you want to edit, then press ENTER.
6. To select the type of device, press the up or down arrows. Refer to Table 9.4 under the column heading "Type Selection" for a list of
choices.
Type
Function
Selection
UNUSED
SD PHOTO
DETECTOR
ION
IFP-75/IFP-75HV Installation/Operation Manual — P/N LS10147-001SK-E:D 06/25/2021
Figure 9.4 Group Properties Screen Programming Options
Figure 9.5 View Group Points
• latching/non-latching
point name
Latching Option
Table 9.4 Point Programming for Internal SLC Module
• silenceable/non-silenceable •
• group assignment (output points)
Comments
Programming
zone assignment (input points)
93