Programming Menu Quick Reference - Honeywell IFP-75 Installation & Operation Manual

Programming Menu Quick Reference

8.5 Programming Menu Quick Reference
This Section of the manual lists all Program Menu options in the order they appear on the sub-Menus. The Default settings are indicated in
text or marked with an asterisk. The Comments column includes the information and a reference to a section (if applicable) which has more
detailed information.
Menu
Edit Module
Module
Add Module
Delete Module
View Module List
Edit Zone
Zone
Edit Zone
View Zone Points
Edit Group
Group
View Group Points Select Group
Edit OPG Template Select template
IFP-75/IFP-75HV Installation/Operation Manual — P/N LS10147-001SK-E:D 06/25/2021
Edit Module ID
Select Module Enter Module Name
Edit Module specific options
5824 Serial/Parallel/
IO
RA-2000 LCD
Annunciator
RA-1000 LCD
Annunciator
RA-100 LCD
Annunciator
RPS-1000 Power
Supply
5496 NAC Expander
5880-LED / IO
Module
5865-LED Annun
Module
SK-NIC Network
Interface Card
Select Module
Select Module
Select Zone
Select Zone
Select Zone to View
Select Group
Modify name and which OPG's are in template
Table 8.4 Programming Quick Reference List
Options/Defaults
Edit Zone Name
Verification Type
Zone Properties
Heat Temp Set
Single/Multi-station
Cadence
CO Single/Multi station
Zone Accessory
Cadence
Opt
Local Zone
Group Name
Template Override
Group Properties
Dynamic Act/Template
Override Cadence
Programming Overview
Comments
Section 9.2.1
Section 9.2.2
Section 9.2.3
Section 9.2.4
*1-Count
2-Count
Alarm Ver.
PAS
SNGL ILOCK
DBL ILOCK
135° to 150°F
Section 9.3.1
135° to 190°F
00-23
00-23
Yes
No
Section 9.2.3
Y or N
00-23 Section 9.4.1
81