Honeywell IFP-75 Installation & Operation Manual page 112

System Operation
Operation
Occurs When
Mode
Supervisory
The system
detects a
supervisory
condition.
The system
detects a
supervisory
condition with a
CO detector
Trouble
A system trouble
condition occurs.
A trouble
condition with a
CO detector
112
System Behavior
The communicator seizes control of the
phone line and calls the central station.
The on-board annunciator sounds a loud,
pulsing beep in the sequence one second on,
one second off.
SUPERVISORY LED flashes.
The LCD displays a screen similar to this
one.
The communicator seizes control of the
phone line and calls the central station.
The on-board annunciator sounds a loud,
pulsing beep in the sequence one second on,
nine seconds off.
SYSTEM TROUBLE LED flashes.
The LCD displays a screen similar to this
one.
Table 10.3 Panel Mode Operation Conditions (Continued)
IFP-75/IFP-75HV Installation/Operation Manual — P/N LS10147-001SK-E:D 06/25/2021
Panel Operation Mode Conditions
In This Mode You Can
Press down arrow to view the supervisory
condition. A screen similar to this one displays.
Press SILENCE and enter an Access Code (or
activate the key) to silence the annunciator.
Once the supervisory condition has been
corrected, the system will restore itself
automatically.
Press down arrow to view the trouble. A screen
similar to this one displays.
Press SILENCE and enter an Access Code (or
activate the key) to silence the annunciator.
Once the trouble condition has been fixed, the
system will restore itself automatically.