3: Event Mapping - Honeywell IFP-75 Installation & Operation Manual

Mapping Overview
8.2.3 Event Mapping
There are 11 types of Zone Events, 14 types of Panel Events, and 6 types of Site Events that can be mapped (see Table 8.2). For each Event
type, you can activate the Output Groups with specific the Output patterns. Mapping examples are shown in Figure 8.4, Figure 8.5, &
Figure 8.6.
System
Fire
Emergency
Advisory
IFP-75/IFP-75HV Installation/Operation Manual — P/N LS10147-001SK-E:D 06/25/2021
Zone
Manual Pull Alarm
Water Flow Alarm
Detector Alarm (heat or smoke detectors)
Zone Aux 1 Alarm
Zone Aux 2 Alarm
Interlock Alert
Interlock Release
Pre-Alarm
Fire Supervisory
Status Point
CO Alarm
CO Supervisory
Trouble
Status Point Active
Figure 8.4 Example of Zone Events Mapped to Output Groups and Patterns
Panel
System Aux 1 Alarm
System Aux 2 Alarm
SBUS Expander Trouble
SBUS Class A Trouble
SLC Loop Trouble
AC Loss Trouble
Battery Trouble
Ground Fault Trouble
Phone Line Trouble
Reporting Account Trouble
Table 8.2 Event Types
Programming Overview
Site
Fire Drill
General Fire Alarm
General Fire Supervisory
General Fire Pre-Alarm
General Trouble
Site Silenced
F1 Key Active
F2 Key Active
F3 Key Active
F4 Key Active
77