Loading And Activating A Service Control Application - Cisco CE 2000 Platform SCE 2000 4xGBE Installation And Configuration Manual

Loading and Activating a Service Control Application

To view the current link mode:
Step 1
To view the current link mappings:
Step 1
Loading and Activating a Service Control Application
The SCE 2000 platform provides the basic functionalities of Service Control analysis and
enforcement. A Service Control solution requires that a Service Control application be loaded into
the platform, to take advantage of the unique SCE platform capabilities.
Loading and activating an application includes the following stages:
•
•
•
The detailed procedure of how to perform these operations is not specified and described in this
manual. For further details, refer to the following documentation:
•
•
SCE 2000 4xGBE Installation and Configuration Guide
6-16
From the SCE 2000
Enter
and press .
From the SCE 2000
physically-connected-links and press
Downloading the application provided as an SLI file to the SCE 2000 disk.
Activating the application.
Configuring the application.
Service Control Application Suite for Broadband User Guide
Service Control Application Suite for Broadband Reference Guide
Chapter 6 Cabling the Line Ports and Completing the Installation
#
prompt, type show interface linecard 0 link mode
#
prompt, type show interface linecard 0
Enter
.
OL-7824-02