Cisco CE 2000 Platform SCE 2000 4xGBE Installation And Configuration Manual page 63

Chapter 4 Installation and Maintenance
Step 3
Figure 4-17: Inserting the Fan Module
When inserting a fan module into the SCE 2000 platform, do not use unnecessary force; slamming the
Warning
fan module into the chassis can damage the connectors on the rear of the module.
Step 4
Note The fan module is not fully seated until you tighten the installation screws on the faceplate.
This completes the procedures for replacing a fan module in a SCE 2000 platform.
OL-7824-02
Gently, but firmly, slide the module into the chassis until its faceplate is flush with the
chassis rear panel.
Seat the fan module in the SCE 2000 platform by tightening the two captive installation
screws with a 1/4-inch flat-blade screwdriver.
SCE 2000 4xGBE Installation and Configuration Guide
Fan Module Overview
4-27