Cisco CE 2000 Platform SCE 2000 4xGBE Installation And Configuration Manual page 128

Troubleshooting Overview
Clearing the User Log
You can clear the contents of the user log at any time. It is recommended that a copy be made
before the log is cleared.
To clear the user log, complete the following steps:
Step 1
Step 2
Step 3
The SCE 2000# prompt appears.
Viewing the User Log Counters
There are two types of log counters:
• User log counters: count the number of system events logged since the last reboot.
Non-volatile counters: are not cleared during boot time
•
To view the user log counters for the current session, complete the following steps:
Step 1
The logger lines information appears, followed by the SCE 2000# prompt.
To view the non-volatile logger counters for both the User log file and the debug log file,
complete the following steps:
Step 1
The non-volatile log counter information appears, followed by the SCE 2000# prompt.
To view the non-volatile counter for the user-file-log only, complete the following steps:
Step 1
The user-file-log non-volatile log counter information appears, followed by the SCE 2000# prompt.
SCE 2000 4xGBE Installation and Configuration Guide
8-6
From the SCE 2000# prompt, type clear logger device user-file-log and press Enter.
The system asks Are you sure?
Type Y and press Enter.
From the SCE 2000# prompt, type show logger device user-file-log
counters and press Enter.
From the SCE 2000# prompt, type show logger nv-counters and press Enter.
From the SCE 2000# prompt, type show logger device user-file-log
nv-counters and press Enter.
Chapter 8 Troubleshooting
OL-7824-02