Cisco CE 2000 Platform SCE 2000 4xGBE Installation And Configuration Manual page 79

Cisco systems ce 2000 platform installation and configuration guide
Hide thumbs Also See for CE 2000 Platform SCE 2000 4xGBE:
Table of Contents

Advertisement

Chapter 5
Connecting the Management Interfaces and Performing Initial System Configuration
Type "any" and press Enter to include any IP address in the ACL.
Note that there is no default for this parameter.
Enter IP address or the word 'any' to denote any IP address:
Step 6
To define an individual IP address, type 0.0.0.0 and press Enter.
There is no default for this parameter.
Enter wildcard bits:
Step 7
If the "any" option was used, no other IP addresses may be added to the list.
Would you like to add another entry to this list? [no]:y
Enter up to 20 entries as described in step 5 and step 6.
Would you like to add another entry to this list? [no]:
Step 8
Would you like to configure another list? [no]: y
Enter up to 20 IP addresses in this new ACL, as described in step 5 and step 6.
Would you like to configure another list? [no]:
You are now prompted to assign the desired ACLs to restrict IP and Telnet access.
Step 9
Type the number of the ACL to be assigned to IP access and press Enter.
To accept the default ACL, press Enter.
Enter IP access-class [0]:
Step 10
Type the number of the ACL to be assigned to the Telnet interface and press Enter.
To accept the default ACL, press Enter.
Enter Telnet access-class [0]: 2
OL-7824-02
If you entered a specific IP address, enter the wildcard bits to define a range of IP
addresses and press Enter. (See Entry Formats (on page 5-13).)
The maximum number of entries in an ACL is 20.
To add more entries, type y and press Enter
When all entries have been added, press Enter
When all entries are added to one list, you are asked whether you would like to create
another ACL. You may define up to 99 ACLs.
To create another ACL, type y and press Enter
When all ACLs have been created, press Enter.
Restrict IP access to the SCE 2000 by assigning the appropriate ACL.
Restrict Telnet access to the SCE 2000 by assigning the appropriate ACL.
SCE 2000 4xGBE Installation and Configuration Guide
Initial System Configuration
5-15

Advertisement

Table of Contents
loading

Table of Contents