Saving The Configuration Settings - Cisco CE 2000 Platform SCE 2000 4xGBE Installation And Configuration Manual

Chapter 7 Basic SCE 2000 Platform Operations
To show the system uptime for the SCE 2000 platform software and hardware, complete the
following steps:
Step 1
The system shows how long the system has been running since the last reboot.
SCE 2000#show system-uptime
SCE 2000 uptime is 21 minutes, 37 seconds
SCE 2000#

Saving the Configuration Settings

When you make changes to the current running configuration and you want those changes to
continue to be valid when the system restarts, you must save the changes before leaving the
management session, that is, you must save the running configuration to the startup configuration
file.
As mentioned before, SCE 2000 platform provides multiple interfaces for the purpose of
configuration and management. All interfaces supply an API to the same database of the SCE
2000 platform and any configuration made through one interface is reflected through all
interfaces. Furthermore, when saving the running configuration to the startup configuration from
any management interface, all configuration settings are saved regardless of the management
interface used to set the configuration.
To save configuration changes, complete the following steps:
Step 1
The running configuration is displayed.
Step 2
Step 3
The system saves all running configuration information to the configuration file, which is used when the
system reboots.
The configuration file holds all information that is different from the system default in a file called
config.txt located in the directory: tffs0:system.
OL-7824-02
At the SCE 2000# prompt, type show system-uptime.
At the SCE 2000# prompt, type show running-config to view the running
configuration.
Check the displayed configuration to make sure that it is set the way you want. If not,
make the changes you want before saving.
Type copy running-config startup-config.
Managing SCE 2000 Configurations
SCE 2000 4xGBE Installation and Configuration Guide
7-7