Cisco CE 2000 Platform SCE 2000 4xGBE Installation And Configuration Manual page 115

Chapter 7 Basic SCE 2000 Platform Operations
To view the running configuration, complete the following steps:
Step 1
The system shows the running configuration.
SCE 2000#show running-config
#This is a general configuration file (running-config).
#Created on 15:50:56
#cli-type 1
#version 1
clock timezone CET 1
snmp-server community "public" ro
snmp-server host 10.1.1.253 traps version 1 "public"
interface LineCard 0
connection-mode active
no silent
no shutdown
flow-aging default-timeout UDP 60
interface FastEthernet 0/0
ip address 10.1.5.109 255.255.0.0
interface FastEthernet 0/1
interface FastEthernet 0/2
exit
line vty 0 4
no timeout
exit
SCE 2000#
One of the useful show commands is the show version command. This command displays
global static information on the SCE 2000 platform as software and hardware version, image
build time, system uptime, last open packages names and information on the SLI application
assigned.
OL-7824-02
At the SCE 2000# prompt, type show running-config.
CET MON February 11 2002
SCE 2000 4xGBE Installation and Configuration Guide
Managing SCE 2000 Configurations
7-5