Chapter 5
Connecting the Management Interfaces and Performing Initial System Configuration
This completes the procedures for connecting the management interfaces and for initial
configuration of the SCE 2000 platform. Proceed to the next chapter for a description of the
procedures for cabling the Gigabit Ethernet ports and for configuring Gigabit Ethernet (GBE)
interface parameters.
E
XAMPLE
The following example displays a typical ping response where the target IP address is 10.1.1.201.
C:\>ping 10.1.1.201
pinging 10.1.1.201 ...
PING 10.1.1.201: 56 data bytes
64 bytes from host (10.1.1.201): icmp_seq=0. time=0. ms
64 bytes from host (10.1.1.201): icmp_seq=1. time=0. ms
64 bytes from host (10.1.1.201): icmp_seq=2. time=0. ms
64 bytes from host (10.1.1.201): icmp_seq=3. time=0. ms
----10.1.1.201 PING Statistics----
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms) min/avg/max = 0/0/0
OL-7824-02
:
Connecting the Management Interface
SCE 2000 4xGBE Installation and Configuration Guide
5-29