Organization; Introduction - Cisco CE 2000 Platform SCE 2000 4xGBE Installation And Configuration Manual

Organization

Organization
The major sections of this guide are as follows:
Chapter
1
2
3
4
5
6
7
8
A
SCE 2000 4xGBE Installation and Configuration Guide
vi
Title
Introduction (on page 1-1) This chapter provides a brief introduction to Cisco Service
Overview ( on page 2-1)
Topology (on page 3-1)
Installation and
Maintenance (on page 4-
1)
Connecting the
Management Interfaces
and Performing Initial
System Configuration (on
page 5-1)
Cabling the Line Ports
and Completing the
Installation (on page 6-1)
Basic SCE 2000 Platform
Operations (on page 7-1)
Troubleshooting (on page
8-1)
The External Optical
Bypass Module (on page
A-1)
Description
Control.
This chapter provides a hardware overview of the SCE
2000 platform.
This chapter describes the possible deployment topologies
of the SCE 2000 and explains how various aspects of the
topology determine the configuration of the system.
This chapter explains how to install a SCE 2000 platform
in a rack or in a general tabletop installation and how to
install or replace the power supply units and fan modules.
This chapter explains how to connect the SCE 2000
platform to a local console and perform the initial system
configuration via the setup wizard that runs automatically.
This chapter provides instructions for cabling the Gigabit
Ethernet ports for both one and two SCE 2000 topologies,
and for configuring Gigabit Ethernet (GBE) interface
parameters. In a topology utilizing two SCE 2000s
(cascade), this includes the cascade ports as well as the
line ports.
This chapter describes how to start up the SCE 2000
platform, reboot, and shutdown. It also describes how to
manage configurations.
This chapter provides basic system startup troubleshooting
information.
This appendix explains how to install the external optical
bypass module.
Preface
OL-7824-02