Rack-Mounting A Sce 2000 Platform - Cisco CE 2000 Platform SCE 2000 4xGBE Installation And Configuration Manual

Chapter 4 Installation and Maintenance

Rack-Mounting a SCE 2000 Platform

You can mount the SCE 2000 platform to a 19" rack. There are two standard types of equipment
racks, and the appropriate brackets for each are provided in the enclosed kit.
•
•
The SCE 2000 mounts to the two front rack posts with brackets that attach to the front of the SCE
2000 The inside width between the two posts or mounting strips (left and right) must be at least
17.3 inches (44 cm).
Remember to leave a two-inch (5 cm) clearance on both sides of the SCE 2000 and at the rear for
Note
adequate airflow for the inlet and exhaust vents.
Because the inlet and exhaust ports (vents) for cooling air are located at both sides of the chassis,
respectively, multiple SCE 2000s can be stacked in a rack with no vertical clearance.
OL-7824-02
19" rack with front rack posts: the mounting kit includes two mounting brackets as illustrated
below.
19" rack with front and back rack posts: in addition to the mounting brackets illustrated
below, the mounting kit includes two crossrail supports that the unit slides onto.
Mounting Brackets for 2-post Rack Mounting Brackets for 4-post Rack
SCE 2000 4xGBE Installation and Configuration Guide
Installing the SCE 2000 Platform
4-7