Fan Module Overview; Removing And Replacing The Fan Module - Cisco CE 2000 Platform SCE 2000 4xGBE Installation And Configuration Manual

Chapter 4 Installation and Maintenance
This completes the steps for reconnecting the DC-input power supply to the SCE 2000 platform.

Fan Module Overview

The fan module provides cooling for the internal components. The fan drawer is a field-
replaceable unit containing five fans, and is installed at the right rear of the SCE 2000 platform.
When a fan malfunctions, the fan module should be replaced as promptly as possible. Although it
is possible for the unit to function for some time with one non-functioning fan, this is not optimal
or recommended.
Figure 4-16: SE2000 Fan Module
When a fan failure occurs, the environment monitor will send an error message to the console. An
SNMP trap indicating that the fan is not functioning properly is also sent. Note that a fan failure is
often audible.

Removing and Replacing the Fan Module

The following sections explain how to remove and replace a fan module in a SCE 2000 platform:
•
•
OL-7824-02
Removing the Fan Module (on page 4-26)
Replacing the Fan Module (on page 4-26)
SCE 2000 4xGBE Installation and Configuration Guide

Fan Module Overview

4-25