Manual Configuration - Cisco 6800 Series Administration Manual

Manual Configuration

Procedure
Step 1
Click Extensions.
Step 2 Make note of the content in the AC field.
The page also contains the list of phone numbers.
Step 3
Click Logout.
Step 4 Power on the handsets.
Step 5
At the PIN entry message on the handset, enter the information captured in Step 2.
The handsets complete the connection to the base station and download their configuration. The handsets are
assigned phone numbers from the pool of numbers available.
Manual Configuration
If your system does not use automatic configuration, you need to configure the base station and handsets
manually.
Related Topics
Configure the Base Station
Before you begin
Connect to the base station web page as described in
The base station needs to be connected to the network and the green LED lit.
Procedure
Step 1
Click Servers.
Step 2 Click Add Server.
Step 3
Set the Server Alias field.
Step 4 Set the Registrar field to the address given by your service provider.
Step 5
Set the Outbound Proxy field to the address given by your service provider.
Step 6 Configure the remaining fields, as described in
Step 7
Click Save.
What to do next
Set the Base Station Country, on page 47
Cisco IP DECT 6800 Series Administration Guide
46
Set Up the Cisco IP DECT 6800 Series (Workflow), on page 13
Sign in to the Administration Web Page, on page
Servers Web Page Fields, on page
Phone Administration
42.
92.