Verify The System Configuration; Back Up The System Configuration - Cisco 6800 Series Administration Manual

Verify the System Configuration

Procedure
Step 1
Press Menu
Step 2 Select Settings
Verify the System Configuration
After you set up the system, check that you can make calls and receive calls from within the system and from
external numbers. For each of the steps below, the called device rings and you are able to hear and talk from
both devices.
If you have problems, the
Before you begin
You need these devices to be configured and active:
• One base station
• Two handsets
Procedure
Step 1
Call from one handset to the other and ensure that you have a two-way audio path.
Step 2 Call from one of the handsets to an external number (for example, a mobile phone) and ensure that you have
a two-way audio path.
Step 3 Call to one of the handsets from an external number and ensure that you have a two-way audio path.

Back Up the System Configuration

You should back up your system configuration. Export the configuration as a file, and save it in a secure
location. Remember that the export file may contain sensitive text.
For information on the configuration, see
Before you begin
Connect to the base station web page as described in
Cisco IP DECT 6800 Series Administration Guide
150
.
> Reset settings.
Troubleshooting, on page 163
Configuration Web Page Fields, on page
chapter may help you.
Sign in to the Administration Web Page, on page
Maintenance
139.
42.