Cisco 6800 Series Administration Manual page 63

Phone Administration
Set Up a Device Certificate and Key Pair
The base station uses the device identity certificate and key pair when the base station acts as a server, or
when the server requires client SSL authentication.
Certificates can be installed on the system in the factory or by your service provider. You can also buy your
own certificates. If you buy and install your own certificates, the certificates must be in DER encoded binary
X.509 (.cer) format.
Before you begin
Connect to the base station web page as described in
Obtain a custom certificate.
Procedure
Step 1 Click Security.
Step 2
In the Device Identify section, click Choose Files.
For information on field requirements, see
Step 3 Select the certificate and click OK.
Step 4
Click Load.
Step 5 Click Save.
Set Up a Trusted Server Certificate
The base station may need a trusted server certificate to validate a certificate chain.
Certificates can be installed on the system in the factory or by your service provider. You can also buy your
own certificates. If you buy and install your own certificates, the certificates must be in DER encoded binary
X.509 (.cer) format.
Before you begin
Connect to the base station web page as described in
Obtain a custom certificate.
Procedure
Step 1
Click Security.
Step 2 In the Trusted Server Certificates section, click Choose File.
For information on field requirements, see
Step 3
Select the certificate and click OK.
Step 4 Click Load.
Sign in to the Administration Web Page, on page
Security Web Page Fields, on page
Sign in to the Administration Web Page, on page
Security Web Page Fields, on page
Cisco IP DECT 6800 Series Administration Guide
Set Up a Device Certificate and Key Pair
112.
112.
42.
42.
55