Cisco 6800 Series Administration Manual page 108

Network Web Page Fields
Field
MDNS
Table 14: NAT Settings Section Fields
Field
Enable STUN
STUN Server
STUN Bindtime
Determine
STUN Bindtime Guard
Enable RPORT
Keep alive time
Table 15: VLAN Settings Section Fields
Field
ID
Cisco IP DECT 6800 Series Administration Guide
100
Contents Description
Values: Indicates if Multicast Domain Name System (MDNS)
is available.
• Disabled (default)
Can only be changed if DHCP is not enabled.
• Enabled
Contents Description
Values: Indicates if RFC3489 Session Traversal UDP for NAT
(STUN) is used.
• Disabled (default)
• Enabled
IPv4 address or URL Identifies the location of the STUN server.
Values: Determines if the base station detects the STUN
bindtime from the NAT bindings.
• Disabled
• Enabled (default)
Integer Identifies the lifetime of the STUN binding.
Range: 0–65535
Default: 80
Value: Indicates if the RPORT is used in SIP messages.
• Disabled (default)
• Enabled
Integer Determines the frequency of keep alive messages (in
seconds) to the server to maintain NAT bindings
Range: 0-65535
Default: 90
Contents Description
Integer Identifies the 802.1Q VLAN.
Range: 0–4094
Default: 0
• Disabled: NAT bindings can't be used
• Enabled: NAT bindings can be used.
Monitoring