Cisco 6800 Series Administration Manual page 83

Hide thumbs Also See for 6800 Series:
Table of Contents

Advertisement

Phone Administration
Step 4
Connect to the administration web page of the new base station. See
on page 42
After the successful connection, the System Information field displays Keep Alive. A new System chain
ID is automatically assigned to both the base stations. The Base Station Group section displays the details
of both the base stations.
What to do next
After you have your dualcell system set up,
Set Up Base Station Replace Timeout in Dualcell Network
After you set up the dualcell system, the connections between the base stations verify every 30 seconds. If
the base stations lose connection within 30 seconds, the message Connection lost! displays on the
Dual Cell web page. If any of the base stations loses connection for a longer duration, the message Replace
the other base displays on the Home/Status web page.
You can set the replacement timeout in the Dual Cell web page of the configuration file (.xml).
Set the replacement timeout this way in the configuration file (.xml).
<Dual_Cell_Replacement_Timeout>n</Dual_Cell_Replacement_Timeout>
Where,
Before you begin
• The time server must be configured on the base station.
• The data sync mode must be configured on the base station, if required.
Procedure
Step 1
Access the base station web page as described in
Step 2
Click Dual Cell.
Step 3
Enter the time in minutes in the field Base Replacement Timeout (15-255 Min).
Step 4
Click Save and Reboot.
Step 5
After the base station reboots, reconnect to the administration web page. See
Step 6
Refresh the browser until the Home/Status page displays Dual Cell Unchained (Unchained)
Allowed to Join as Secondary in the System Information field.
and use the IP address you made note of in Step 3.
is the time in minutes. The default time is 15 minutes and the maximum time to enter is 255 minutes.
n
Set Up Base Station Replace Timeout in Dualcell Network
Sign in to the Administration Web Page,
Back Up the System Configuration, on page
Sign in to the Administration Web Page, on page
Cisco IP DECT 6800 Series Administration Guide
150.
42.
75

Advertisement

Table of Contents
loading

This manual is also suitable for:

68236825

Table of Contents