Cisco 6800 Series Administration Manual page 105

Monitoring
Field
Remote Caller ID Source
Priority
Enable Blind Transfer
Call Statistics in SIP
Codec Priority
Max number of codecs is 5
G729 Annex B
Use ptime
RTP Packet Size
Contents
Values:
• PAI - FROM (default)
• FROM
• ALERT_INFO - PAI -
FROM
Values:
• Disabled (default)
• Enabled
Values:
• Disabled (default)
• Enabled
Values, one or more of:
• G711A
• G711U
• G722
• G726
• G729
• OPUS
Values:
• Disabled (default)
• Enabled
Values:
• Disabled
• Enabled (default)
Values:
• 20 ms (default)
• 40 ms
• 60 ms
• 80 ms
Description
Contains SIP information used for the Caller ID source.
Indicates if you can use direct transfer.
This field is new in Firmware Release 5.0.
Indicates whether the call quality is sent to the call control system.
Identifies the code priority that base stations use for audio
compression and transmission. You can change the order of the
codecs.
To get OPUS to display in the list, click Reset Codecs.
If you change the list in any way, you must press Reset
Note
Codecs on this page and Reboot chain on the Multi
cell page.
Starting in Firmware Release 4.7, only the first five codecs in the
list are used.
Indicates if the G729 Annex B is used.
Indicates if the RTP Packet Size parameter is used.
Indicates the preferred RTP packet size when the packet size is
negotiated.
Cisco IP DECT 6800 Series Administration Guide
Servers Web Page Fields
97