Cisco 6800 Series Administration Manual page 13

Cisco IP DECT 6800 Series
Features
Dual Cell Network
Firmware Filename Modification
SIP Notification of Handset Removal
New and Changed Information for Firmware Release 5.0
New or Changed Information
New sections:
• Add an Additional Base Station to Make a
Dualcell Network (Workflow), on page 72
• Dual Cell Web Page Fields, on page 118
• Dualcell Troubleshooting, on page 169
• Turn On Dualcell Debug Logs, on page 173
Updated sections:
• Cisco IP DECT 6800 Series Overview, on page
1
• Set Up the Cisco IP DECT 6800 Series
(Workflow), on page 13
• Handset Registrations, on page 21
• Single Cell, Dualcell, and Multicell Networks,
on page 22
• Mount the Base Station or Repeater on the
Ceiling, on page 26
• Mount the Base Station or Repeater on a Desk,
on page 30
• Mount the Base Station or Repeater on the Wall,
on page 31
• Set the Base Station Country, on page 47
• Add Additional Base Stations to Make a
Multicell Network (Workflow), on page 76
• Home/Status Web Page Fields, on page 83
• Handset Screen Displays "Searching", on page
168
New sections:
• Downgrade the Base Stations, on page 158
• Downgrade the Handsets , on page 159
Updated sections:
• Firmware Update Web Page Fields, on page 109
• System Upgrades and Downgrades, on page 151
New section: Configure the SIP Notify Authentication,
on page 48
Updated section: Servers Web Page Fields, on page
92
Cisco IP DECT 6800 Series Administration Guide
5