Cisco 6800 Series Administration Manual page 139

Monitoring
Field
Operation/Duration
D-H:M:S
DECT Operation
D-H:M:S
Busy
Busy Duration
D-H:M:S
SIP Failed
Terminal Removed
Searching
Free Running
Source Changed
Calls Web Page Fields
These are the fields displayed on the Calls link of the Statistics web page of the base station.
Table 60: Calls Web Page Fields
Field
Base Station Name
Operation/Duration
D-H:M:S
Count
Description
Displays the time since the last reboot and the cumulative up-time since
the last reset of statistics or the last firmware upgrade.
Identifies the time that the DECT protocol was active.
Contains the number of times that the base was busy (can't handle more
active calls).
Displays the cumulative time that the base was busy.
Displays the number of times that a SIP registration failed.
Displays the number of times that a handset was marked as removed.
Displays the number of times that the base was searching for its sync
source.
This field only displays on the 210 Multi-Cell Base Station.
Displays the number of times that a base hasn't synchronized its data
from the sync source.
If this state is triggered often, you may need to make changes to your
base station configuration. For more information, see
on page 161.
This field only displays on the 210 Multi-Cell Base Station.
Displays the number of times that the base changed its sync source.
This field only displays on the 210 Multi-Cell Base Station.
Description
Contains the base IP address and name. The last row of the table contains
the sum of all the preceding rows in the table. If there's only one base
station in the system, then only the summary (Sum) row displays.
Displays the time since the last reboot and the cumulative up-time since
the last reset of statistics or the last firmware upgrade.
Displays the number of calls handled on the base.
Cisco IP DECT 6800 Series Administration Guide
Statistics Web Page Fields
Base Station States,
131