Cisco 6800 Series Administration Manual page 114

Management Web Page Fields
Field
Auto Stop Alarm
Auto Stop Alarm Delay
(s)
Table 24: Configuration Section Fields
Field
Configuration File
Download
Configuration Server
Address
Base Specific File
Multi Cell Specific File
Cisco IP DECT 6800 Series Administration Guide
106
Contents Description
Values: Indicates if the handset should stop the automatic
emergency notification.
• Disabled (default)
• Enabled
Integer Indicates the time (in seconds) before the handset
stops automatic emergency notification.
Default: 30
Contents Description
Values: Indicates the type of configuration file for the base
station.
• Disabled
• Base Specific File
(default)
• Multi Cell specific
File
• Base and Multi Cell
Specific File
IP address or URL Identifies the server or device that provides the
configuration file to the base station.
Identifies the base configuration file name.
Identifies the configuration file for the multicell
system. The filename is the chain id.
This field only displays on the 210 Multi-Cell Base
Station.
• Disabled: The handset doesn't stop notification.
• Enabled: The handset stops the notification after
the number of seconds set in Auto Stop Alarm
Delay.
• Disabled: no file expected
• Base Specific File: base station expects a
filename in this format:
<mac address>.cfg
• Multi Cell specific File: base station expects a
filename in this format:
<chain id>.cfg
• Base and Multi Cell Specific File: base station
expects a filename in these formats:
• <mac address>.cfg
• <chain id>.cfg
Monitoring