Cisco 6800 Series Administration Manual page 98

Terminal Web Page Fields
Field
Do Not Disturb
Terminal Web Page Fields
These are the fields displayed on the Terminal web page of the base station. You click on the IPEI number
of the handset in the Extensions page to see this screen.
The page displays in admin and user views. Not all fields are available in user view.
This section is applicable to Firmware Release 4.7. For the page for Firmware Release V450 and V460, see
Terminal Web Page Fields for Firmware Release V450 and V460, on page
Table 11: Terminal Web Page Fields
Field
IPEI
Paired Terminal
AC
Alarm Line
Alarm Number
Cisco IP DECT 6800 Series Administration Guide
90
Contents Description
Values: Indicates if the user can turn on do not disturb (DND)
mode.
• Disabled (default)
• Enabled
Contents Description
10 character string Identifies the International Portable Equipment
Identity (IPEI) of the handset. Each handset has a
unique IPEI number, and the number is displayed on
the label under the handset battery and on the label
of the handset box.
If you change this field, the handset deregisters.
Values: Identifies the terminal paired with the handset.
• No Paired Terminal
• Handset ID
4 digit code Identifies the access code that was used to register the
handset. After the handset registers, this code is not
used.
Note
Values: Identifies the line to be used for alarm calls.
• No Alarm Line
Selected
• Telephone number
Phone number Identifies the number to be dialed when a user presses
and holds the Emergency
handset for 3 seconds or more.
141.
We recommend that you change this from
the default when you start to set up your
system to increase security.
Monitoring
button on the