Cisco 6800 Series Administration Manual page 128

Multi Cell Web Page Fields
Field
Dual cell debug
After you set the Dual cell system field to Enabled, and reboot the base station, a message displays on the
page.
Multi Cell Web Page Fields
These are the fields displayed on the Multi Cell web page of the base station.
This page only displays on the 210 Multi-Cell Base Station.
Table 47: Multi Cell Status Section Fields
Field
System Information
Last packed received from IP
Cisco IP DECT 6800 Series Administration Guide
120
Contents
• None
• Data Sync
• Auto Tree
• Both (default)
Description
Indicates the current status of the base station in the multi cell
configuration.
Indicates the IP address of the last communicator to the base station.
Description
Indicates the level of the dualcell system
debugging information stored in the logs.
• None (default)—No debugging
information.
• Data Sync—Writes header
information for all packets received
and sent to be used to debug any
special issues.
Note This setting generates
many logs, so use it for
a short period when you
debug the issues.
• Auto Tree—Writes states and data
related to the Auto Tree
Configuration feature.
• Both—Both Data Sync and Auto
Tree are enabled.
Note This setting generates
many logs, so use it for
a short period when you
debug the issues.
Monitoring