Reboot The Base Station From The Web - Cisco 6800 Series Administration Manual

Maintenance
•
•
•
•
•
•
•
•
•
•
•
Reboot the Base Station from the Web Pages
When you need to reboot the base station, you have two reboot choices:
• Reboot-The reboot takes place when the base station has no active connections, such as active calls,
• Forced Reboot-The reboot takes place within 1 minute. Activity on the base station immediately stops.
Note When the base station reboots, a new syslog starts and the previous information is lost. If you have a problem
and plan to reboot, save the syslog file to your computer before you do the reboot.
Before you begin
Connect to the base station web page as described in
The base station needs to be connected to the network and the green LED lit.
Reboot the Base Station from the Web Pages, on page 147
Reboot the Base Station Remotely, on page 148
Remove the Handset from the Web Page, on page 148
Remove the Handset Remotely, on page 149
Reset the Base Station to Factory Defaults, on page 149
Reset the Handset to Factory Defaults, on page 149
Verify the System Configuration, on page 150
Back Up the System Configuration, on page 150
Restore the System Configuration, on page 151
System Upgrades and Downgrades, on page 151
View Base Statistics, on page 160
directory access, or firmware update activity.
6
C H A P T E R
Sign in to the Administration Web Page, on page 42
Cisco IP DECT 6800 Series Administration Guide
147