Cisco 6800 Series Administration Manual page 133

Monitoring
Table 52: IEEE1588 LAN Synchronization Settings
Field
IEEE1588
Star Codes Web Page Fields
These are the fields displayed on the Star Codes web page of the base station.
Table 53: Star Codes Web Page Fields
Field
Call Return
Blind Transfer
Call Forward All Activate
Call Forward All
Deactivate
Call Wait Activate
Call Wait Deactivate
Contents Description
Values: Enabled: Indicates the use of LAN synchronization.
The following are the network requirements for LAN
• Disabled (default)
synchronization:
• Enabled
Code Description
Default: 69 Dial this star code to return a call.
Default: 88 Dial this star code to transfer a call without
consultation.
Default: 72 Dial this star code to forward all calls.
Default: 73 Dial this star code to stop make calls ring on the phone
again.
Default: 56 Dial this star code to enable the call waiting tone.
Default: 57 Dial this star code to disable the call waiting tone.
Cisco IP DECT 6800 Series Administration Guide
Star Codes Web Page Fields
• The Sync Master and Sync Slave base stations
support a maximum of 3 cascaded Ethernet
switches.
• We recommend and support only the switches
which meet the IEEE1588 Ethernet
synchronization requirements.
• All base stations must connect to a dedicated
DECT VLAN.
• The DECT VLAN in all the switches which
connect to the DECT infrastructure must be
configured to the highest priority.
• The backbone network load should not exceed
50 percent of the total link capacity.
• The Ethernet switch must use DSCP as QoS
parameter.
• The network must support multicast datagrams
from IEEE1588.
125