Cisco 6800 Series Administration Manual page 82

Set Up a Dualcell System on the Secondary Base Station
Step 3
Make sure that Dual cell system is set to Enabled (default).
Step 4 Set the rest of the fields as described in
Step 5
Click Save and Reboot.
Step 6 After the base station reboots, reconnect to the administration web page. See
Web Page, on page
Step 7
Refresh the browser until the Home/Status page displays Dual cell Unchained(Setup Socket)
Allowed to join as Primary in the System Information field.
What to do next
Set Up a Dualcell System on the Secondary Base Station, on page 74
Set Up a Dualcell System on the Secondary Base Station
After you set up your primary base station for a dualcell system, you can add one more base station with this
procedure. Both base stations in the dualcell system use the same System chain ID.
The primary base station connects with the secondary base station in 5 to 8 minutes. After the connection, the
primary base station automatically synchronizes the data.
Note
If you changed the administration password on the primary base station before you started the dualcell
configuration, the password automatically changes on the secondary base station during the synchronization
phase.
Before you begin
• You must complete
• The Home/Status page of the primary base station must display Allowed to join as Primary
Procedure
Step 1 Set up the new base station hardware with
Step 2
Mount the new base station with one of these options:
•
•
•
Step 3
Access the new base station web page. See
MAC address of the new base station.
Make a note of the IP address for this base station, as displayed in the browser.
The Home/Status page displays Unchained Allowed to Join as Primary.
Cisco IP DECT 6800 Series Administration Guide
74
42.
Set Up a Dualcell System on the Primary Base Station, on page
in the System Information field.
Mount the Base Station or Repeater on the Ceiling, on page 26
Mount the Base Station or Repeater on a Desk, on page 30
Mount the Base Station or Repeater on the Wall, on page 31
Dual Cell Web Page Fields, on page
Install the Base Station, on page
Sign in to the Administration Web Page, on page 42
Phone Administration
118.
Sign in to the Administration
73.
25.
and use the