Cisco 6800 Series Administration Manual page 87

Phone Administration
Before you begin
In each location, set up a multicell system with all the base stations communicating with each other.
Determine which base stations will be the primary base stations in each location, and which base stations will
communicate with which primary base station.
Procedure
Step 1 Access the primary base station web page. See
Step 2
Click Multi Cell.
Step 3 In the DECT system settings area, set Allow multi primary to Enabled.
Step 4 In the Base Station Group area, set the DECT sync source field for each secondary base station in your
location to connect to the primary for the location.
Step 5 Set the DECT Property field to "Primary for <location>".
For example, set the field to "Primary for HQ".
Step 6
Set the DECT sync source for the next primary base station to Primary.
Step 7 Set the DECT Property field to "Primary for <location>".
For example, set the field to "Primary for Warehouse".
Set Up a Multicell System in Multiple Geographical Locations
Sign in to the Administration Web Page, on page
Cisco IP DECT 6800 Series Administration Guide
42.
79