Cisco 6800 Series Administration Manual page 149

Monitoring
Field
FWU Progress
VoIP Idx
Extension
Display Name
Server
Server Alias
State
Terminal Web Page Fields for Firmware Release V450 and V460
These are the fields displayed on the Terminal web page of the base station. You click on the IPEI number
of the handset in the Extensions page to see this screen.
Terminal Web Page Fields for Firmware Release V450 and V460
Contents Description
This field is read-only Identifies the firmware update (FWU) state:
This field is read-only Identifies the index of the configured SIP extension.
Identifies the telephone extension assigned to the
handset.
(Admin view only) This field is a link to further
information about the handset in the Extension page.
This field is read-only Identifies the name assigned to the handset.
This field is read-only Identifies the Server IP Address or URL.
This field is read-only Identifies the server alias, if configured.
This field is read-only Identifies the SIP registration state and the base station
that the handset is registered to. If the field is empty,
the handset isn't SIP-registered.
Cisco IP DECT 6800 Series Administration Guide
• Off—Identifies that the sw version field is set
to 0 in the Firmware Update page.
• Initializing—Identifies that the update process
is starting.
• X%—Identifies the progress of the update, where
X is the amount of progress (0–100)
• Verifying X%—Identifies that the firmware
verification is in progress before it is used.
• Waiting for charger—Identifies that the firmware
update is complete and the handset needs to be
put into the charger to install the new firmware.
• Conn.term.wait—Identifies that the repeater
firmware update is complete and the repeater
reset is in progress.
• Complete—Identifies that the firmware update
is complete.
• Error—Identifies that the update was not
successful. Possible reasons included:
• File can't be found.
• File isn't valid.
141