Cisco 6800 Series Administration Manual page 150

Terminal Web Page Fields for Firmware Release V450 and V460
The page displays in admin and user views. Not all fields are available in user view.
This section is applicable to Firmware Release V450 and V460. For Firmware Release 4.7, see
Page Fields, on page
Table 72: Terminal Web Page Fields
Field
IPEI
Paired Terminal
AC
Alarm Line
Alarm Number
Dial Plan ID
Battery and RSSI Status
Battery level
Cisco IP DECT 6800 Series Administration Guide
142
90.
Contents
10 character string
Values:
• No Paired Terminal
• Handset ID
4 digit code
Values:
• No Alarm Line
Selected
• Telephone number
Phone number
Values: 1 to 10
Percentage
Description
Identifies the International Portable Equipment
Identity (IPEI) of the handset. Each handset has a
unique IPEI number, and the number is displayed on
the label under the handset battery and on the label
of the handset box.
If you change this field, the handset deregisters.
Identifies the terminal paired with the handset.
Identifies the access code that was used to register the
handset. After the handset registers, this code is not
used.
We recommend that you change this from
Note
the default when you start to set up your
system to increase security.
Identifies the line to be used for alarm calls.
Identifies the number to be dialed when a user presses
and holds the Emergency
handset for 3 seconds or more.
Admin view only
Identifies the index of the dial plan, configured in
Plans Web Page Fields, on page
Read-only field
Displays the current charge level of the handset
battery.
Monitoring
Terminal Web
button on the
Dial
127.