Cisco 6800 Series Administration Manual page 116

Management Web Page Fields
Field
Syslog Level
TLS security
Syslog Server IP Address
Syslog Server Port
Table 26: Emergency Numbers Section Fields
Field
list of numbers
The Promiscuous Mode section is new in Firmware Release 4.8.
Table 27: Promiscuous Mode Section Fields
Field
Enable in (min)
Promiscuous mode
timeout in
Cisco IP DECT 6800 Series Administration Guide
108
Contents Description
Values Identifies the level of system-level log messages to
be saved on the syslog server.
• Off
• Normal Operation
(default)
• System Analyze
• Debug
Values Controls TLS 1.2 security.
• Disabled (default)
• Enabled
IP address or URL Indicates the address of the Syslog server.
0-xx Indicates the port of the Syslog server.
Default: 514
Contents Description
Indicates the available emergency numbers.
Contents Description
Number Indicates the time for the base station in promiscuous
mode.
This field is read-only. Indicates the remaining time to deregister the handsets.
• Off—No messages saved
• Normal Operation—Normal message for:
operational events, incoming calls, outgoing
calls, handset registration, DECT location, call
lost due to busy, critical system errors, and
general system information.
• System Analyze—Captures logs for handset
roaming, handset firmware updates status. The
system analyze level also contains the messages
from normal operation.
• Debug—Captures logs for debugging problems
Note Don't enable Debug logs during
normal operation. These logs can
result in system slowdown.
• Disabled: system doesn't use TLS 1.2.
• Enabled: system uses TLS 1.2.
Monitoring