Cisco 6800 Series Administration Manual page 148

Web Pages for Previous Firmware Releases
Web Pages for Previous Firmware Releases
Extensions Web Page Fields for Firmware Release V450 and V460
These are the fields displayed on the Extensions web page of the base station.
The page displays in admin and user views. Not all fields are available in user view.
This section is applicable to Firmware Release V450 and V460. For Firmware Release 4.7, see
Web Page Fields, on page
Table 70: General Section
Field
AC
Table 71: Extensions Section
Field
Idx
IPEI
Terminal State
Terminal Type, FW Info
Cisco IP DECT 6800 Series Administration Guide
140
84.
Contents
4-digit numerical code
Contents
This field is read-only.
This field is read-only
This field is read-only
Description
Identifies the access code (AC) for the base station.
Description
Identifies the index of the handset.
Indicates the International Portable Equipment
Identity (IPEI), the unique DECT identification
number for the handset.
This field is a link to further information about the
handset in the Terminal page.
The handset can appear in the list twice if it has 2
lines assigned to it.
Indicates the current status of the handset:
• Present@RPNxx—Handset is connected to the
base station RPNxx; where xx is the number of
the base station.
• Detached—Handset is not connected (for
example, powered off).
• Located—Handset is powered on but can't
connect to the base station.
• Removed@RPNxxx—Handset has not
connected to the base station (out of sight) for a
specific amount of time, typically one hour.
Identifies the handset model number and the firmware
version.
Monitoring
Extensions