Cisco 6800 Series Administration Manual page 135

Monitoring
Field
Conference Tone
Page Tone
Dial Plans Web Page Fields
These are the fields displayed on the Dial Plans web page of the base station.
Table 55: Dial Plans Fields
Field
Idx
Dial Plan
Repeaters Web Page Fields
These are the fields displayed on the Repeaters web page of the base station.
Table 56: Repeaters Web Page Fields
Field
Idx
RPN
Name/IPEI
DECT sync source
DECT sync mode
State
Type/FW Info
Description
Played to all parties when a three-way conference call is in progress.
This field is new for Firmware Release 4.8.
Played to all handsets when the base station receive a page.
Description
Indicates the index number of the dial plan (used in the
Page Fields, on page 90
Contains the definition of a dial plan.
Contents Description
This field is read-only Identifies the index of the repeater
This field is read-only Identifies the repeater number.
This field is read-only Indicates the configured name and IPEI of the
repeater.
This field is read-only Indicates the base station the repeater communicates
with.
This field is read-only Indicates the type of synchronisation with the base
station.
This field is read-only Indicates the state of the repeater.
This field is read-only Indicates the firmware version of the repeater.
Cisco IP DECT 6800 Series Administration Guide
Dial Plans Web Page Fields
page).
• Disabled: The repeater isn't configured to
communicate with the base.
• Enabled: The repeater is configured to
communicate with the base.
Terminal Web
127