Cisco 6800 Series Administration Manual page 154

Perform a Site Survey
• IP: the IP address of the base station.
If the base station is powered on but isn't connected to the LAN, the handset displays 0.0.0.0.
• RFPI: the Radio Fixed Part Identity (RFPI) of the base station.
• RSSI: the Received Signal Strength Indicator of the signal from the base station to the handset.
Step 6 Press Power/End
Step 7 Move to a different location and repeat Steps 2, 3, and 5 to check the coverage.
Cisco IP DECT 6800 Series Administration Guide
146
until you return to the main screen.
Monitoring