Parameter List; Table 8: Auxiliary Transducer Block Parameters - Honeywell SLG 700 Option Manual

Parameter List

Table 9: Auxiliary Transducer block parameters
Parameter Name
ST_REV
TAG_DESC
STRATEGY
ALERT_KEY
MODE_BLK
BLOCK_ERR
UPDATE_EVT
BLOCK_ALM
PRODUCT_LEVEL
LEVEL_RANGE
INTERFACE_LEVEL
PRODUCT_VOLUME
PRODUCT_VOLUME_RANGE
LINEARIZATION_TYPE
LINEARIZATION_DATE
Page 48 FOUNDATION Fieldbus Option User's Manual
Description
The revision level of the static data associated with the
function block.
The user description of the application of the block.
Used to identify grouping of blocks.
The identification number of the plant unit.
The actual, target, permitted, and normal modes of the
block.
Reflects the error status associated with the hardware or
software components associated with a block. It is a bit
string, so that multiple errors may be shown.
This alert is generated by any change to the static data.
The BLOCK_ALM is used for all configuration, hardware,
and connection failure or system problems in the block.
The cause of the alert is entered in the subcode field.
The first alert to become active sets the Active status in
the Status attribute. After the Unreported status is
cleared by the alert reporting task, another block alert
may be reported without clearing the Active status, if the
subcode has changed.
This product level follows the product level of Level
Transducer Block
This product level Range follows the product level Range
of Level Transducer Block
This interface level follows the interface level of Level
Transducer Blok
This product volume follows the product volume of Level
Transducer Block
This product volume range follows the product volume of
Level Transducer Block
The user can Linearize the table using following methods
1. Dry
2. Wet
The Date of Linearization can be updated whenever
Linearization is done, the format is MM/DD/YYYY
HH:MM:SS
Rev.5