Table 11 Lcd Parameters - Honeywell SLG 700 Option Manual

3.8.2.
To stop displaying the message, select the Clear Message method. After selecting this option, the
device clears the entered Message from the Display.
Table 12 lists the permitted parameters that can be configured using the LCD block. The selected
parameter value will be displayed on the local display screen.
RADAR LEVELTB
ANALOG INPUT BLOCK
ARITH
ISEL
Rev.5
Clear Message
Table 12 LCD parameters
Block
FOUNDATION Fieldbus Option User's Manual
FF Parameter
Product Level
Distance To Product
Product Level Rate
Interface Level
Distance To Interface
Interface Level Rate
Vapor Thickness
Product Volume
Electronic Temperature
Vapor Volume
Upper Product Volume
Lower Product Volume
Upper Product Thickness
PV
OUT
FIELD_VAL
IN
IN_LO
IN_1
IN_2
IN_3
OUT
IN_1
IN_2
IN_3
IN_4
Page 65