Lcd Transducer Block Configuration - Honeywell SLG 700 Option Manual

6.8 LCD Transducer block configuration

6.8.1. Device:
This menu provides the facility to select the mode of the target/device, to configure any parameter
keep the target mode as OOS, if it is in AUTO mode then the parameters can't be configured.
6.8.2. Display Settings:
This menu consists Rotation time, Language, Language pack, Display connected, Contast level,
Display software version, Message, Rotate enable parameters, the description of parameters under
display settings menu is available in section 3.8.3.
Page 154 FOUNDATION Fieldbus Option User's Guide Rev. 3.0