Honeywell SLG 700 Option Manual page 160

On entering all the requested details the transmitter will start the capture sequence and in progress
message will be displayed to show the progress. The function of the button will also change, as shown
below, allowing the user to Abort the currently active method if required.
Upon completion of the process, a pop-up message such as the one shown below will be displayed
indicating whether the capture was successful or not. In the case of a successful capture there may also
be some additional information or warnings provided. The new background is immediately applied by
the transmitter, but sees the comments above for the active Background Type parameter.
Method will ask whether to put mode back to previous mode, ok clicking ok block will be put back to
previous mode and method will be completed with the below message.
Page 144 FOUNDATION Fieldbus Option User's Guide Rev. 3.0