Honeywell SLG 700 Option Manual page 70

Parameter Name
SURFACE_REFL_MODEL_WT
SURFACE_REFL_MODEL_GAIN
SURFACE_REFL_MODEL_ATTEN
SURFACE_OBJ_FUN_THRESHOLD
INTERFACE_REFL_ST_CT
INTERFACE_REFL_MODEL_WT
INTERFACE_REFL_MODEL_GAIN
INTERFACE_REFL_MODEL_ATTEN
INTERFACE_OBJ_FUN_THRESHOLD
END_OF_PROBE_REFL_MODEL_WT
END_OF_PROBE_REFL_MODEL_GAIN
END_OF_PROBE_REFL_MODEL_ATTEN
END_OF_PROBE_OBJ_FUN_THRESHOL
D
PROCESS_CONN_REFL_MODEL_WT
PROCESS_CONN_REFL_MODEL_GAIN
PROCESS_CONN_REFL_MODEL_ATTE
N
PROCESS_CONN_OBJ_FUN_THRESHO
LD
CALIBRATION_OFFSET
REFERENCE_PLANE_OFFSET
DATA_START_INDEX
DATA_END_INDEX
HON_RES_4
HON_RES_5
Page 54 FOUNDATION Fieldbus Option User's Manual
Description
Determines the width of the Surface wave where it
crosses the x axis (one half wavelength).
Amplitude of the wave shape.
Increased attenuation results in smaller side lobes of the
wave's shape.
If changing the gain does not help try increasing
threshold.
Defines the start position (cm) of a 240cm wide search
window. This parameter is not used under normal
operation as the search window positions are
automatically updated by a level tracking algorithm.
Determines the width of the Interface wave where it
crosses the x axis (one half wavelength).
Amplitude of the wave shape.
Increased attenuation results in smaller side lobes of the
wave's shape.
If changing the gain does not help try increasing
threshold.
Determines the width of the Probe End wave where it
crosses the x axis (one half wavelength).
Amplitude of the wave shape.
Increased attenuation results in smaller side lobes of the
wave's shape.
If changing the gain does not help try increasing
threshold.
Determines the width of the Process Connector where it
crosses the x axis (one half wavelength).
Amplitude of the wave shape.
Increased attenuation results in smaller side lobes of the
wave's shape.
If changing the gain does not help, try increasing the
threshold.
Offset to compensate for a change in geometry at the
process connector that affects the measurement
Distance between the reference radar pulse reflection
and the physical reference plane (flange) in the factory
Used to read Echo Data
Used to read Echo Data
Reserved for Honeywell use only.
Reserved for Honeywell use only.
Rev.5