Configuration Of The Transmitter Using Handheld (Hh); Figure 29: Connecting The Transmitter To The Handheld - Honeywell SLG 700 Option Manual

4.2 Configuration of the transmitter using Handheld (HH)

Figure 29 graphically represents the connection of the transmitter to the handheld. Each transmitter
includes a configuration database that stores its operating characteristics in a non-volatile memory.
The handheld is used to establish and/or change selected operating parameters in a Transmitter
database. The process of viewing and/or changing database parameters is called configuration.
Configuration can be accomplished both online and offline with the Transmitter powered up and
connected to the handheld. The online configuration immediately changes the Transmitter operating
parameters. For offline configuration, Transmitter operating characteristics are entered into the
handheld memory for subsequent downloading to a Transmitter.

Figure 29: Connecting the transmitter to the handheld

Rev.5 FOUNDATION Fieldbus Option User's Manual Page 115