3.5
Level Transducer block
The Level Transducer block has all the basic configuration parameters and functions required to
measure and calculate the level. The values that are measured and calculated by the transducer block
are available as output values and are called as "channels". The measured values can be read cyclically
from function blocks. See Table 7 for list of parameters.
Execution
The Level Transducer block supports the following process variables:
Product Level
Product Level %
Distance To Product
Product Level Rate
Vapor Thickness
Vapor Thickness %
Interface Level
Interface Level %
Distance To Interface
Interface Level Rate
Upper Product Thickness
Product Volume
Vapor Volume
Lower Product Volume
Upper Product Volume
Page 26
Figure 2: Level Transducer Block
FOUNDATION Fieldbus Option User's Manual
Rev.5