Level Transducer Block Configuring - Honeywell SLG 700 Option Manual

6.6 Level Transducer block configuring

The Level Transducer block has all the basic configuration parameters and functions required to
measure and calculate the level. Completion of the Level Transducer Block (Level TB) is a quick way
to start operating the SLG 700 transmitter in most applications. This configuration consists of few
parameters.
Level TB contains three main menus Device, Process & Diagnostics.
6.6.1. Device menu:
This menu contains three tabs namely Block modes, Ranges & Sensor.
Block Mode:
This menu provides facility to the user to select the mode of the target/device, to configure any
parameter user has to keep the target mode as OOS, if it is in AUTO mode then user can't configure
the parameters. User can also configure the Permitted mode & normal mode.
Page 128 FOUNDATION Fieldbus Option User's Guide Rev. 3.0