Figure 30: Single Liquid; Figure 31: Two Liquids Flooded - Honeywell SLG 700 Option Manual

Measured Products:
This configuration parameter allows the number of products in the tank to be identified. The available
options are:
Single Liquid: In this application the SLG 700 measures the level of one liquid product in the tank
with a vapor, which is usually air, above the product. This application is shown in Figure 30.
Two Liquids Flooded: In this application there are two liquid products in the tank; one supported on
top of the other, as shown below in Figure 31. As the name indicates, the tank is always full with the
Upper Product occupying the entire upper portion of the tank so that there is no vapor above the Upper
Product. The SLG 700 measures the level of the interface (boundary) between the two liquid products
in the tank.
Rev.5

Figure 30: Single Liquid

Figure 31: Two Liquids Flooded

FOUNDATION Fieldbus Option User's Manual Page 133