Honeywell SLG 700 Option Manual page 141

16. Right click on the FF H1 Communication DTM device in the project view and select
Additional functions.
17. Then select Set DTM Address from the context menu. The new window will open then
provide device address(device to be commissioned before this with experion or NI host)
Double click on the SLG700 Rev.1 R100 or Rev.2 R101 or Rev.3 R102 in the project window
depending on which firmware version is running on the SLG700 transmitter.
Rev.5 FOUNDATION Fieldbus Option User's Manual Page 125