Setting Up A Direct Communication Link To Ek280; Updating Customized Parameters; Send Parameter File - Honeywell Elster EK280 Applications Manual

EK280

3.4 Setting up a direct communication link to EK280

Ensure your PC or laptop has a COM port.
Start the enSuite program (i.e.:
Select the "Search
In the "Search device and connect
Select "Access"
Enter the serial communication link speed under "Baudrate"
Press "OK".
After a few seconds

3.5 Updating customized parameters

Prerequisite: A communication link between enSuite and the EK280 via optical interface, modem or network
(TCP/IP) has been set up. (see chapter "3.1", to 3.3)
Select "Navigation" on the left-hand side.
Click on the plus sign beside
your devices.
Click on the entry beginning with the serial number of the connected device.
The device identifier is now displayed at the bottom of the navigation window. If no command list is
displayed underneath, click on the arrow next to the device identifier.
Select "Parameterize
Click on the plus sign next to "Parameter" at the top of the navigation window, to expand the
parameter tree.
In this parameter tree you can open parameter pages, to update parameters or drill down to open
more parameter pages.

3.6 Send parameter file

Prerequisite: A communication link between enSuite and the EK280 via optical interface or modem or
network has been set up. (see chapter 3.1 to 3.3)
Select "Navigation" on the left-hand side.
Click on the plus sign next to "Connections" in the newly-opened navigation window.
Click on the entry beginning with the serial number of the connected device.
The device identifier is now displayed at the bottom of the navigation window.. If no command list is
displayed underneath, click on the arrow next to the device identifier.
Select "Send parameter file
Click "Open..." in the top right
Select "Open file..." in the window and click on the directory and then the parameter file (file extension
".wpp") and select "Open".
Click on "Start" in the bottom right and wait until the file has been successfully sent.
To begin another task, click again on "Navigation" on the left-hand side.
Application Manual
Start > Programs > Elster >
device..." icon (magnifying glass icon)
" window select the "LIS200" tab
"LIS200"," User" "Administrator",
"connected " is displayed at the bottom of the
"My Devices" in the newly-opened navigation window, to see a list of
online"
"
enSuite)
"Connection " "Serial RS232"
"Output " window.
10