Using The Dtm; Introduction; Components; Downloads - Honeywell SLG 700 Option Manual

6.1 Introduction

SLG 700 Fieldbus models support DTMs running on PACTware or FDM / Experion. To set up the
DTM network on the FDM/Experion, refer to the FDM/Experion User Guide. In this manual, the
procedure is given to run the SLG 700 FF DTM on PACTware (Version 4.1 or above).

6.2 Components

In order to be able to use the FF DTM the user needs the following:

PACTware or some other Container application.

Microsoft .NET Framework.

Latest FF Communication DTM: Free version of FF Communication DTM available for
download from CodeWrights website.

The SLG700 FF DTM can be downloaded from Honeywell website:
www.honeywellprocess.com

NI FBUS communication modem.

NI FBUS communication modem driver (Available at www.ni.com).

6.3 Downloads


Download 1: PACTware 4.x and .NET 2.0
Download from http://pactware.software.informer.com/download/

Download 2: FF Communication DTM
Download from

Download 3: Honeywell FF DTM Library
Download from HPS web site:

Download 4: NI FBUS modem driver
Download from web site:
Page 120

6. Using the DTM

http://www.codewrights.biz/
www.honeywellprocess.com
www.ni.com
FOUNDATION Fieldbus Option User's Guide Rev. 3.0