Honeywell Thor VM3 User Manual page 142

•
The software installed on the Thor VM3 is summarized below.
Note: Due to the complex folder structure and System Registry under Microsoft Windows,
software should not be removed manually. Instead use the Windows Control Panel.
Microsoft Windows
Microsoft Windows is installed in the \Windows subfolder, which is the Windows
default. In addition, Windows places files in other folders and subfolders during instal-
lation. For more information, please refer to commercially available Microsoft Windows
OS user guides.
Device Drivers
Device drivers are installed for all installed hardware options, such as the display, touch
screen, radios, etc. For more information on Microsoft Windows device drivers, please
refer to commercially available Windows OS reference guides.
Radio Software
The Thor VM3 is delivered with the radio software installed. Because the Thor VM3 uses
a Microsoft Windows operating system, the radio installation includes Windows device
drivers.
Touch Screen Software
Software is installed for calibrating the standard resistive touch screen. See
Screen Calibration
Touch screen calibration is not necessary with the optional Projective Capacitance
(PCAP) touch screen.
RFTerm
(Start) > All Programs > RFTerm
Optional terminal emulation software. The application can also be accessed by double-
clicking the RFTerm desktop icon.
•
•
132 Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
touch screen software
for more information.
It is necessary to run to run RFTerm as an administrator when modifying settings
because RFTerm must be able to access and make changes to the Windows registry.
Rather than selecting to run as administrator each time, right-click on the RFTerm icon
and select Properties. Tap the Compatibility tab and check Run this program as an
administrator. This modification affects the current user only unless Change settings
for all users is tapped before changing the privilege level.
Touch