Honeywell Thor VM3 User Manual page 42

Power Configuration
Use the
For information on the Ignition input signal see
Connection
AC/DC
The Thor VM3 is designed to power on whenever external power is attached. When
external power is present, the "Plugged In" power management timeouts are used,
Ignition Control
The Thor VM3 is configured to power on when the vehicle ignition is switched on. When
either Ignition Control/Ignition On or Ignition Control/Ignition Off is selected and
external power is present, the Thor VM3 uses the "Pugged In" power management plan/
scheme settings which corresponds to the state of the vehicle ignition.
Auto-On
The Thor VM3 is designed to power on whenever external power is present. When exter-
nal power is present, the "Plugged In" power management timeouts are used.
UPS
The Thor VM3 uses the UPS mode whenever external power is not available. When
external power is not present, the "Running on Batteries" or "On battery" power man-
agement timeouts from the selected power scheme/plan are used.
32 Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
Power Options control panel to select the desired power scheme/plan.
and Auto-On Control Wiring
Vehicle 10-60VDC Direct Power
Diagram.